|
Category | Custom / cruiser |
Year | 2012 |
Model | Suzuki Intruder M800 |
|
Engine and Transmission Specifications |
Transmission type,final drive | Shaft drive (cardan) |
Gearbox | 5-speed |
Cooling system | Air |
Fuel control | OHC |
Fuel system | Injection |
Valves per cylinder | 4 |
Bore x stroke | 83.0 x 74.4 mm (3.3 x 2.9 inches) |
Compression | 9.4:1 |
Engine details | 45 degree V-twin |
Engine type | V2, four-stroke |
Capacity: | 805.00 ccm (49.12 cubic inches) |
|
Brakes, suspension, Frame and wheels |
Rear brakes | Expanding brake (drum brake) |
Front brakes diameter | 300 mm (11.8 inches) |
Front brakes | Single disc. 2-piston caliper |
Rear tyre dimensions | 170/80-M15 |
Front tyre dimensions | 130/90-M16 |
Rear suspension | Link type, coil spring, oil damped |
Front suspension | Inverted telescopic, coil spring, oil damped |
Physical measures and capacities |
Fuel capacity | 15.50 litres (4.10 gallons) |
Wheelbase | 1,655 mm (65.2 inches) |
Overall width | 920 mm (36.2 inches) |
Overall length | 2,370 mm (93.3 inches) |
Overall height | 1,125 mm (44.3 inches) |
Seat height | 700 mm (27.6 inches) If adjustable, lowest setting. |
Weight incl. oil, gas, etc | 269.0 kg (593.0 pounds) |
Dry weight | 247.0 kg (544.5 pounds) |
Other specs |
Comments | Italian brand. |
Factory warranty | 3 years |
Instruments | Electronic/analogical rev counter and speedometer with multifunctional LCD display |
Reserve fuel capacity | 4.50 litres (1.19 gallons) |
Wheelbase | 1,470 mm (57.9 inches) |
Ground clearance | 162 mm (6.4 inches) |
Power/weight ratio | 0.5909 HP/kg |
Wheels | Excel spoke rims with aluminium channel |
Rear brakes diameter | 220 mm (8.7 inches) |
Rear tyre | 180/55-R17 |
Front tyre | 120/70-R17 |
Rear wheel travel | 150 mm (5.9 inches) |
Rear Suspension | Oval steel tube swin arm. Single lateral shock absorber with fully adjustable pibby tank |
Front wheel travel | 150 mm (5.9 inches) |
Front Suspension | Marzocchi upside-down fork |
Trail | 100 mm (3.9 inches) |
Rake (fork angle) | 24.5° |
Frame type | Verlicchi high strength steel tube tellis frame |
Exhaust system | 3-way catalytic converter with oxygen sensor. |
Emission details | Euro 3. |
Clutch | Wet, multi-plate |
Lubrication system | Forced with trochoidal pump |
Ignition | I.A.W. electronic |
Valves per cylinder | 4 |
Bore x Stroke | 107.0 x 66.0 mm (4.2 x 2.6 inches) |
Torque | 102.00 Nm (10.4 kgf-m or 75.2 ft.lbs) @ 6700 Revolutions">RPM |
Power | 117.00 Horsepower">HP (85.4 Kilowatt">kW)) @ 8500 Revolutions">RPM |
Capacity: | 1187.00 ccm (72.43 cubic inches) |
Model | Moto Morini 9 1-2 |
Color options | Black, grey, white |
Starter | Electric |
Please Login or Register if you would like to leave a comment.