|
Category | Sport |
Year | 2012 |
Model | NCR Mike Hailwood TT |
Engine and Transmission Specifications |
Exhaust system | Full titanium exhaust. |
Transmission type,final drive | Chain |
Gearbox | 6-speed |
Cooling system | Oil & air |
Fuel control | DOHC |
Fuel system | Injection. NCR Corse-EFI, EFI Euro 1, NCR Racing Harness with interface with AMI MXL PISTA display. NCR-EFI system accepts full mapping capabilities along with Lambda interface for closed loop mapping control. |
Valves per cylinder | 2 |
Torque | 135.00 Nm (13.8 kgf-m or 99.6 ft.lbs) @ 7000 |
Power | 130.00 |
Engine details | Ducati NCR 1120. Titanium connecting rods carved out of billet, high compression forged pistons with single piston ring, custom F1 type crankshaft from billet with longer stroke, NCR CORSE cams, titanium valves, ported heads. |
Engine type | V2, four-stroke |
Capacity: | 1120.00 ccm (68.34 cubic inches) |
|
Brakes, suspension, Frame and wheels |
Wheels | BST-NCR Carbon fiber wheels |
Rear brakes diameter | 200 mm (7.9 inches) |
Rear brakes | Single disc. WAVE Braking-NCR, Brembo Racng 2 piston monoblock |
Front brakes diameter | 300 mm (11.8 inches) |
Front brakes | Single disc. WAVE Braking-NCR, radial Brembo Racing 4 piston monoblock |
Rear tyre dimensions | 190/55-17 |
Front tyre dimensions | 120/70-17 |
Rear suspension | Ohlins dual shock tuned by NCR. |
Front suspension | Ohlins FGR 900 pressurized MotoGP fork tuned by NCR. Triple clamps made from AL 7075 with adjustable offset from 28 to 36 mm in 1 mm increments. |
Frame type | NCR titanium frame. |
Physical measures and capacities |
Wheelbase | 1,390 mm (54.7 inches) |
Power/weight ratio | 0.9559 HP/kg |
Dry weight | 136.0 kg (299.8 pounds) |
Other specs |
Comments | Italian brand. |
Factory warranty | 3 years |
Instruments | Electronic/analogical rev counter and speedometer with multifunctional LCD display |
Starter | Electric |
Reserve fuel capacity | 4.50 litres (1.19 gallons) |
Fuel capacity | 21.00 litres (5.55 gallons) |
Wheelbase | 1,470 mm (57.9 inches) |
Ground clearance | 162 mm (6.4 inches) |
Overall width | 865 mm (34.1 inches) |
Overall length | 2,170 mm (85.4 inches) |
Seat height | 800 mm (31.5 inches) If adjustable, lowest setting. |
Rear tyre | 180/55-R17 |
Front tyre | 120/70-R17 |
Rear wheel travel | 150 mm (5.9 inches) |
Rear Suspension | Oval steel tube swin arm. Single lateral shock absorber with fully adjustable pibby tank |
Front wheel travel | 150 mm (5.9 inches) |
Front Suspension | Marzocchi upside-down fork |
Trail | 100 mm (3.9 inches) |
Rake (fork angle) | 24.5° |
Emission details | Euro 3. |
Clutch | Wet, multi-plate |
Lubrication system | Forced with trochoidal pump |
Ignition | I.A.W. electronic |
Valves per cylinder | 4 |
Bore x Stroke | 107.0 x 66.0 mm (4.2 x 2.6 inches) |
Torque | 102.00 Nm (10.4 kgf-m or 75.2 ft.lbs) @ 6700 Revolutions">RPM |
Capacity: | 1187.00 ccm (72.43 cubic inches) |
Model | Moto Morini 9 1-2 |
Color options | Red/green/white. Historical Mike Hailwood NCR colors with a pearl base. All air brushed (no stickers). |
Please Login or Register if you would like to leave a comment.