Ducati Monster 796 20th Anniversary - 2013 Specifications and Reviews
2013
General information | |
Category | Naked bike |
Year | 2013 |
Model | Ducati Monster 796 20th Anniversary |
| |
Engine and Transmission Specifications | |
Exhaust system | Lightweight 2-1-2 system with catalytic converter with twin lambda probes |
Emission details | Euro 3 |
Driveline | Chain; Front sprocket 15; Rear sprocket 39. Primary drive: Straight cut gears; Ratio 1.85. |
Clutch | APTC wet multiplate with hydraulic control |
Transmission type,final drive | Chain |
Gearbox | 6-speed |
Cooling system | Air |
Fuel control | Desmodromic valve control |
Fuel system | Injection. Siemens electronic fuel injection, 45mm throttle body |
Valves per cylinder | 2 |
Bore x stroke | 88.0 x 66.0 mm (3.5 x 2.6 inches) |
Compression | 11.0:1 |
Torque | 78.00 Nm (8.0 kgf-m or 57.5 ft.lbs) @ 6250 |
Power | 85.83 |
Engine type | V2, four-stroke |
Capacity: | 803.00 ccm (49.00 cubic inches) |
Brakes, suspension, Frame and wheels | |
Wheels | Y-shaped, 5-spoke in light alloy |
Rear brakes diameter | 245 mm (9.6 inches) |
Rear brakes | Single disc. Two-piston calipers. |
Front brakes diameter | 320 mm (12.6 inches) |
Front brakes | Double disc. Four-piston calipers. |
Rear tyre dimensions | 180/55-ZR17 |
Front tyre dimensions | 120/70-ZR17 |
Rear suspension | Progressive linkage with preload and rebound Sachs adjustable monoshock |
Front suspension | 43mm upside-down forks |
Trail | 87 mm (3.4 inches) |
Rake (fork angle) | 24.0° |
Frame type | Tubular steel Trellis frame |
Physical measures and capacities | |
Fuel capacity | 15.00 litres (3.96 gallons) |
Wheelbase | 1,450 mm (57.1 inches) |
Seat height | 800 mm (31.5 inches) If adjustable, lowest setting. |
Power/weight ratio | 0.5140 HP/kg |
Weight incl. oil, gas, etc | 187.0 kg (412.3 pounds) |
Dry weight | 167.0 kg (368.2 pounds) |
Other specs | |
Comments | Limited edition of 10 bikes. |
Oil capacity | 4.90 litres (0.32 quarts) |
Wheelbase | 1,626 mm (64.0 inches) |
Rear tyre | 240/40-VR18 |
Front tyre | 130/60-VR18 |
Rear Suspension | Dual Penske; coil over with cooling reservoir; multi adjustable. |
Front Suspension | Marzocchi 50mm. inverted front forks with radial mounts. |
Bore x Stroke | 111.1 x 111.1 mm (4.4 x 4.4 inches) |
Torque | 203.40 Nm (20.7 kgf-m or 150.0 ft.lbs) |
Color options | Red/bronze |
Factory warranty | 2 years unlimited mileage |
Instruments | Digital unit displaying Speedometer, rev counter, clock, scheduled maintenance warning, oil temperature, trip fuel, lap time, warning light for low oil pressure, fuel level, fuel reserve, neutral, turn signals, overrev, immobilizer. Ready for DDA system. |
Starter | Electric |
Please Login or Register if you would like to leave a comment.